Expert Answers about Chevrolet Underbody Tool Box

• Where is The Best Place To Install An Underbody Tool Box On a Gooseneck Trailer?
• The best place to install the RC Manufacturing Z-Series Truck or Trailer Underbody Tool Box # UB1818-48 on your gooseneck trailer is going to be in front of your axles. This is the best place when you consider the approach and departure angles for the trailer as well as distributing weight across the trailer.
  view full answer...


• Recommended Large Storage Box for Tail Gate System On 5th Wheel Trailer
• The closest storage/tool box we offer in the dimensions you listed is DeeZee Specialty Series Underbody Toolbox part # DZ76 which measures 60" long x 20" wide x 18" tall. I have attached a list of all other storage/tool boxes for you to look though as well but the above option is the best match we have for you and will work well in the space you listed. Please note, there is a mounting kit you will need in the DeeZee Mounting Kit for Underbody and Side-Step Toolboxes part # DZDB-2502. I...
  view full answer...


• Mounting Options For The Buyers Products Toolbox On The Top Of A Truck's Bedrails
• Yes, the Buyers Products Underbody Toolbox # 3371717110 can be mounted to the top of your truck's bedrails. Since the manufacturer intended this to be an underbody mount you would have to do a little bit of redneck engineering to connect the Mounting Brackets for Buyers Products 48" Poly Toolboxes # 3371701001 to the bedrails. You could shoot some self-tapping screws through the base of the mounting bracket into the bedrails to secure it. From there you can connect the tool box to the...
  view full answer...


• UWS Underbody Toolbox Mounting Orientation With Doors Opening Up Versus Down
• The UWS Underbody Toolbox # UWS04012 can be mounted to have the doors open upward. The doors are sealed with gaskets and feature a water channel design to keep out rain. The UWS emblem will be upside down but you will be able to correct that by drilling out the rivets and installing new rivets if that does bother you.
  view full answer...


• Compatibility of Underbody Toolbox and Trailer Tray Cargo Carrier
• Since the Stromberg Carlson Trailer Tray Cargo Carrier # CC-255, has tray dimensions of 32" long x 20" wide and measures 14" wide from back to angle cut. And the RC Manufacturing Z-Series Truck or Trailer Underbody Toolbox # UBT1818-30 overall dimensions are 30" long x 18" wide x 18" tall, we just need to make sure that the box will fit on the carrier. The edges on the carrier are angled, because of those angles the box will not fit on the carrier. This determination was based on how far...
  view full answer...


• Best Trailer Hitch for a 2013 Honda Civic
• I recommend theCurt Trailer Hitch Receiver Custom Fit # C11391. This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Important things to remember when installing is that no drilling is required for installation. Access holes may need to be enlarged by drilling, filing, or rotary tool. Exhaust must be temporarily lowered for installation and a minor heat shield modification may be required. Trimming your fascia, will not be...
  view full answer...


• Will Curt Trailer Hitch Receiver # C11077 Fit The 2014 Honda CRZ "EX Model
• Yes, the Curt Trailer Hitch Receiver # C11077 is confirmed fit for 2014 Honda CR-Z. I verified with my contact at Curt manufacturing that you will have no issues installing # C11077 on the EX model. There is no drilling required for installation. The access holes may need to be enlarged by drilling, filing, or rotary tool. The exhaust must be temporarily lowered for installation. There is underbody trimming required (not fascia). The recommend ball mount for this setup is # C45520....
  view full answer...


• Can DeeZee Toolbox DZ76 be Mounted Somewhere Other than Under the Body of a Trailer
• You can mount toolbox # DZ76 pretty much anywhere that you have space and a structure to which to mount it. Based on the picture you have submitted it looks like it can mount exactly where you want it. I do not foresee any problems with this application.
  view full answer...


• Can Fifth Wheel Hitch be Used in 2010 GMC Sierra with Tool Box
• You can most likely use the tool box, but I would recommend taking a few measurements to make sure there will not be any clearance issues. You will need to make sure that the height and depth of the tool box will not interfere with the fifth wheel trailer. If the height of the front of the trailer loft clears the top of the tool box by at least 6 inches, you should be just fine. The fifth wheel hitch is installed on the truck so that the king pin sits directly over the center of the...
  view full answer...


• Can Airlift 88284 Air Bags Be Used With B&W Underbed Rail System
• The Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88385 replaced part number 88284 and is a confirmed fit for 4 wheel drive 2017 F150 models compatible with in bed hitch # BW77FR. For two wheel drive, # AL88268 and # AL57268 are both fits but are not specifically compatible with in bed hitches. Included are additional video resources for review as well.
  view full answer...


• Can a Tool Box be Installed with the TracRac TracONE # TA27000XTB on a 2005 Ford F-150
• Since the TracRac TracONE # TA27000XTB that you referenced (or any ladder rack for that matter) installs on the bed rails of your 2005 Ford F-150 you will not be able to utilize a tool box that sits on the bed rails of your truck. Technically you could put the box on top of the clamps, but that would most likely damage them and/or your box. The only way to get them to fit together is to either move the tool box or the front set of bars on the rack towards the middle of the bed. You could,...
  view full answer...


• Can Kabgard Headache Rack Fit with Truck Bed Tool Box
• The Buyers Products Kabgard Headache Rack # 33785204 that you referenced does normally fit with tool boxes. I attached a picture of a crossover style box installed with the rack. As long as your box does not extend past the top of your bed rails this will work well with it. No additional hardware is needed for applications with tool boxes either. I attached a review video link for this for you to check out as well.
  view full answer...


• Does Buyers Products Ladder Rack Fit 2005 Chevy Silverado 2500 With Tool Boxes
• The answer really depends on how your tool boxes are mounted to your 2005 Chevy Silverado 2500. Since the Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501150 clamps onto your truck's bed rails (see photo), if the main tool box extends out to the rails, and/or if the side mounted tool boxes are up towards the bed rails, then it would not fit. Each of the ladder racks that fit your truck do in fact clamp to the bed rails so you would likely need to remove the tool boxes to get...
  view full answer...


• Will DeeZee Topsider Tool Box DZ70 Fit Ford F-250 Fitted with TracRac Ladder Rack TH37003XT
• The TracRac Pro2 Truck Bed Ladder Rack for Super-Duty Pickups # TH37003XT includes integrated tool box mounts as well as two additional clamps to support the rear end of a tool box. My contact at TracRac confirmed that the Topsider style tool boxes from DeeZee will work fine as long as you choose a suitable size. For example, the 5.3-cubic-foot Aluminum Topsider # DZ70 measures 48-inches long, so you'll just want to measure the available space between the vertical posts on the TracRac...
  view full answer...


• Tool Box and Auxiliary Tank for 2018 Ram 3500 Long Bed
• If you want a single item that can both store tools and supply additional fuel capacity for your Ram 3500 long bed you might consider the DeeZee Combo Auxiliary Tank # DZ92740X. This unit combines a 43-gallon tank and a tool chest in one product that measures 54 long x 18 deep x 17-3/4-inches tall. If you prefer to have the tool box near the rear of the bed then instead you could use the 38-gallon tank # DZ91752X at the cab and then use left and right black wheel well tool boxes # DZ95B...
  view full answer...


• Replacement Key for UWS Tool Box Lock CH 506
• You're exactly on the money. To open the UWS Tool Box on your truck, you will want to get the replacement key # KEYCH506.
  view full answer...


• Can A CrossOver Tool Box Be Used With The Adarac Custom Truck Bed Ladder Rack?
• I have a solution for you, but Adarac specifically states that their ladder racks are not compatible with other bed-rail-mounted or stake-pocket-mounted accessories such as tool boxes. So the Adarac Custom Truck Bed Ladder Rack - Steel with Aluminum Crossbars # A4004148 would not work with that. However, since this ladder rack attaches to the top of the bed rail, you could install a tool box that fits inside the bed rails which would not interfere with the Adarac ladder rack. You could...
  view full answer...


• How To Determine If Ranch Hitch Adapter Will Work On Truck Bed With Tool Boxes & Have Clearance
• With having tool boxes in your bed you still need to have 6" of clearance from the top of the tool box to the underside of your 5th wheel camper. Using the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter # AM3100 you will still need to measure your pin box dimensions to ensure you will not have any issues with the corners of the pin box hitting either a front mounted or side mounted tool box. Remember you will need Safety Chains # AM3109 as they are required on all ball type...
  view full answer...


• Can the Aries AdvantEdge # AA88VB Fit with a Crossover Toolbox on My 2020 Ford F-250?
• With a crossover tool box on your 2020 Ford F-250, it truly depends on how your tool box installs on your truck and if it can be re-positioned. Since the Aries AdvantEdge Headache Rack - Chrome Powder Coated Aluminum # AA88VB mounts right on top of the bed's side rails at the rear of the cab (see attached picture), you will have to shift the tool box a bit toward the back of the bed so that the front end of the tool box rests against the bases of the headache rack. For example, if your...
  view full answer...


• Can Thule Xsporter Pro Truck Ladder Rack Fit Truck with Tool Box in Truck Bed
• The Thule Xsporter Pro Truck Bed Ladder Rack # TH500XTB that you referenced is compatible with truck bed tool boxes like you mentioned having. You just would install the forward upright assembly behind the tool box if the box goes over the bed rails.
  view full answer...